ShockTec™ Digital Shock Detectors

ShockTec™  is a digital shock detector providing reliable 24-hour perimeter protection. A break-in is detected as soon as the intruder attempts to force, smash, drill or even saw through the protected window, door, wall or roof.

ShockTec™ employs an advanced digital microprocessor to analyze the vibration signal received from the piezo electric sensor.

A unique feature of ShockTec™ 600S is its digital sampling of the signal simultaneously in two separate channels, each channel amplified at a different gain. This provides an extremely wide dynamic range of the sampled signal, enabling precise measurement and analysis of the shock signal.


Shock Tech - Digital Shock Detector


  • Digital Microprocessor with Intelligent Digital Signal Processing
  • Gross Attack detection
  • Intelligent Digital Signal processing – differentiates between naturally caused vibrations and cuts out frequencies that cannot be caused by an illegal entry attempt
  • Ideal for windows, doors, walls and roofs
  • Encapsulated bi-morph piezo electric sensor
  • Model name: RK600S ShockTec Digital Shock Detector

Technical Specifications

  • Supply voltage: 9V-16V DC
  • Current consumption (typical) 12.5mA
  • Operational temperature: -20°C to 60°C
  • Maximum humidity: 95% non-condensing
  • Sensitivity setting: Dual stage potentiometer
  • Tri-color LED indicator: Orange-over-sensitive, green: alarm & correct calibration, red: under-sensitive
  • Contact ratings:
  • Alarm relay: 100mA at 24VDC, NC
  • Tamper relay: 500mA at 24VDC, NC
  • Alarm Time: 2.5 seconds
  • Latching modes: Any or first to latch operation modes
  • Max No. of units on AnyLatch loop: 80
  • Max no of unites on 1st to Latch loop: 10
  • False alarm protection: Digital microprocessor signal processing and noise reduction with maximum ground plane
  • Electrostatic discharge: No false alarms up to 8kV
  • RF immunity: 40 V/m from 80MHz to 1GHz
  • Enclosure material: Flame retardant ABS
  • Enclosure dimensions: 25x28x95mm